 | |
| IN THE ABOVE MTC FOR SA 333 GRADE 6 MATERIAL THE TENSILE STRENGTH REQUIREMENTS ARE ACCORDANCE WITH ASME SEC II Pt D TABLE Y-1 |
 |
| IN THE ABOVE TABLE LINE 32 IS FOR SA 333 GRADE 6 MATERIAL |
 |
| IN LINE 32 THE MINIMUM TENSILE STRENGTH GIVEN IS 60000 PSI AND YIELD IS 35000 PSI OUR ACTUAL VALUES AFTER TESTING IS GREATER THAN THAT REFER THE MTC FOR ACTUAL VALUES MARKED ( 72000PSI AND 52000PSI) HENCE ACCEPTABLE |
 |
| THE ABOVE TABLE IS TAKEN FROM ASME SEC II PART A FOR MATERIAL SA 333 IN THIS TABLE FOR GRADE 6 MATERIAL THE MINIMUM TENSILE AND YIELD STRENGTH VALUES ARE SAME AS MENTIONED OTHER TABLE ( TABLE Y1) GIVEN ABOVE |
